Welcome to Boardsort™ - Learn - Sell - Profit -

Anybody who won't mind is welcome.

More here. Laptop board is large metal socket pay currently right? Also the metal socket is loose and appears to have gold pins. Goes into gold connector ends I think.

1) big telco. Two cd/DVD boards. Two peripheral (under telco board) and two motors

2)Large socket (laptop) board. Bunch of peripheral. A piece of metal and the board on right looks like another cd/dvd board.
Unscrew the ati video board for peripheral or better. Remove hard drive caddy

Awesome job especially since my pics are not the best. I'm trying not to be a burden. For future advice should I picture less pieces at a time so I can take closer, less blurry pics? I also don't want to make threads a mile long with too many pics.

No burden. That's what the forum is for!

Given that there are threads 3 pages deep in pics before you get to the question... you're fine.
These aren't that bad for photos either. If you can get just slightly closer (like not having the row on the Right side), you'd be perfect.

Something is bugging me about that large board in the first pair. It almost looks like a breadboard. Aka a development board. Can you post two more shots... one if just the board and one of a blank spot on it. Breadboard has no class on it's own. It get scanned on site to find a materials value for a custom quote. Much like pin and peg boards. Are the components easily removable? Try gentle pulling or prying with a tiny screwdriver one or two of the chips. Do they come out easily?

Really appreciate all the input it's helping me get goin right on here and not looking so foolish. I will post better pictures of that board. Those square caps can come off with a gentle lift. I'm pretty sure it came out of the back of a large older electric piano. There were boards 5x the size of that in it as well but I scrapped them where they only pay me .10 per lb. no matter what..so I saved that one because I'm weird and I thought it may be worth more than 25 cents hah.

Hope this helps you better I.d. because you're beyond helpful.

If this doesn't help no worries I'll just take what I get when I'm there. I do not complain or argue I don't have enough experience to really dispute. Besides BS would pay me out better than any place local to me.

That's what I thought. Be careful if that's a soldering iron I see on the puc. Stuff like, Could have lots of lead in it. nasty fumes and major health issues.

let Chris know upfront by email before you ship or come in. That's going to be full of one if two things; silver (great) or lead (ouch) if not both (peripheral).
Silver will get you a boost over standard boards, but to what is up to them. Lead, I think you're still good on population for peripheral.