Welcome to Boardsort™ - Learn - Sell - Profit -

Learn to properly Sort, Sell, and Profit from your electronic scrap material.
It is currently Wed Jun 10, 2026 11:06 pm

Board index » What is it? Identification Forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Previous topic | Next topic 
Author Message
GuyFawkes
PostPosted: Fri Sep 06, 2024 9:22 am 

Joined: Thu Sep 05, 2024 9:52 am
Posts: 1
Not sure how to classify these two boards.

Board 1 is from a Sierra Wireless: AirLink LS300. I'm thinking maybe low grade telecom?
Attachment:
1_Front_From Sierra Wireless_AirLink LS300.png

Attachment:
1_Back_From Sierra Wireless_AirLink LS300.png


Board 2 are small boards with a CCD sensor and are about 2"x1.25" so not very big at all but I have a few. I'm thinking high/low peripheral?
Attachment:
2_Small Board with CCD.png


I would appreciate any help on this.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
Reply with quote  
Catwhisker
PostPosted: Sun May 24, 2026 7:52 pm 
User avatar

Joined: Mon Apr 15, 2024 9:38 pm
Posts: 704
Location: Western Pennsylvania
Board #1 I would remove the screws and nuts on the connector. Then remove the other 2 threaded studs. I also would remove the sides of the shielding you left on the board. By experience. I know you can cut back the metal on the other connector. Just be careful. Leave the contacts. Doing that. You would definately secure Low Telecom. And. You may possibly get a High Telecom out of it. Considering the gold showing on the board.
Board#2 High Peripheral. Due to the known gold content of a CCD sensor. Also the other connector.
Here to learn like everybody else
My evaluations are my own


Last edited by Catwhisker on Sun May 24, 2026 11:41 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
austin86
PostPosted: Sun May 24, 2026 9:28 pm 
User avatar

Joined: Thu Jul 20, 2023 8:30 pm
Posts: 617
Location: Ohio
the second one might go as apple cpu

_________________
Sent from your deceased grandmother's rotary phone.
Top
 Profile  
Reply with quote  
marked141
PostPosted: Sun May 24, 2026 9:56 pm 

Joined: Sat Nov 29, 2014 9:44 pm
Posts: 2327
Location: I'm right here :D
As is I'd say 1 can go low Telco, if you clean all the way fencing from the shields without removing any of the goodies inside and pull the screws i think that's good for high Telco.

If the chip is visibly gold inside (the color is not great in the picture do you'll need to determine that) the glass then I'd lean high Telco there also.

_________________
Here to learn more so I can recycle more
My grades are my own opinion and not an official grade from Boardsort
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » What is it? Identification Forum

All times are UTC - 5 hours [ DST ]

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: