Welcome to Boardsort™ - Learn - Sell - Profit -

I am trying to get my first shipment together and need to know how to classify this boards. Any guidance is appreciated and thank you in advance.

10)peripheral likely, or backplane depending on the backside
9)peripheral
8)peripheral
7)midgrade
6)telco
5)likely small socket
4)telco
3)telco
2)telco if you can remove the bracing bracket
1)gold cap chip board, and heavy at that. :)

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D

lostinlodos,
Thank you so much!

If 10 has any ports or ICs on the backside it will go as backplane. If not unfortunately it's passive and would go peripheral. I'm guessing it's blank because i see pass through port

9 is missing stuff

7 not sure if this was butchered or just an unfinished piece. Not that it matters for grading. But I recognised it right off and it's missing, well, everything.

5 is a primary controller board. It's missing some of the 'mandatory' things I usually point out but in this case I see it clearing the class regardless.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D